BlogHotel.orgAccueil | Créer un blog | Imprimer la page Imprimer | Blog hasard Au hasard | Chercher des blogs Rechercher | Entrer dans le chat du blog Chat | | Jeux Jeux | Adminitration et édition du Blog Manager

Outils Xhorse VVDI

• 25/1/2021 - How to Solve Antivirus Problem when Install Xhorse Software?


Anyone else having problems with the latest xhorse vvdiprog software and windows 10?
The Windows defender keeps deleting it. Can’t get the windows defender to turn off and stay off to fix it.
Some Xhorse antivirus software prevent you from downloading and installing the software after you have installed it.  Here’s solution to solve Win10 antivirus issues for Xhorse VVDI2VVDI MB or VVDI BMW Software to prevent interference from your antivirus software. 

Users can extract the file from a zip/rar file or use an Installer to install Xhorse software. Both of these require the following steps before you download, install and use any Xhorse software.

1: Turn off Anti-virus and Windows Security/Defender 

Go to the Windows icon in the bottom left corner of the screen and input  “Windows Security” and click the blue icon with a white shield that pops up under “Best match”.

The “Windows Security” panel will be displayed


Then go to “Virus & threat protection settings

Click the shield icon with a small warning symbol in the bottom right corner.

Then it comes with this windows.  Check the”Real-time protection” option. It is set to “ON” by default. You need to turn this to “OFF


If you have any other antivirus software you will also need to disable them during download. Each antivirus software will have its own how-to guide on how to deactivate them when downloading from a trusted source.

Step 2: Download Xhorse Software provides you latest Xhorse software download for free, check

Remember where your xhorse software have been stored on your device.  If the files came as Zip or Rar download then keep note of where you extracted the files as you’ll need this in Step 3. If you used an installer as is common with VVDI2, then you will need to keep a note of where the installer has placed the software files. Such as: C Drive > Program Files > Xhorse.

Step 3: Add folder to Windows Security Exclusion List

You will need to exclude the installed Xhorse files, as once your antivirus software is reactivated it will scan your computer regularly for viruses. The antivirus software will often identify your Xhorse files as a virus, so to avoid the software being corrupted you need to add them to your antivirus exclusion list.

Go back to the ‘Windows Security‘ panel then ‘Virus & threat protections‘. Scroll down to Exclusionsand click ‘Add or remove exclusions‘. This will take you to a new interface called ‘Exclusions’ with a button shaped like a plus sign which says ‘Add an exclusion‘. Click this and select ‘Folder‘ from the dropdown menu, then simply navigate to your extracted or installed Xhorse softwares’ folder and click ‘select folder’. This is not the folder where you downloaded the file but the folder where the file will runfrom on your device.


Once again if you have another antivirus software you will need to add the folder containing your Xhorse software to its exclusion list.

Step 4: Reactivate “Real Time Protection” 

Go back to Virus & threat protection and turn ‘Real-time protection’ to “ON” to prevent any threats from Malware. Your Xhorse software will now be ready to use and protected from your antivirus software.


Commentaires (0) :: Poster un Commentaire! :: Lien Permanent

• 21/1/2021 - Xhorse Condor Mini Plus Clmap and Cutting Calibration

 How to calibrate Xhorse Condor XC-Mini Plus automatic key cutting machine? This post is going to show the procedure in details.


Power on Condor XC-Mini Plus, press “Self Test” on main menu.



Step 1. Height Level Adjustment

To start this process, make sure the cutter is lower than the probe. Press “Height Level Adjustment”.



  1. Install and tighten Clamp M1. there is no need to put any key on the clamp.
  2. Cutter lever needs to be adjusted every time after changing the probe and the cutter.
  3. Then length of the A position should be less than 2cm.
  4. After the fixed installation of the probe and the cutter, then end tip of the probe needs to be lower than the cutter’s(see ex.I).
  5. Must use the original probe.


Press “Continue”, the cutter on XC-Mini Plus starts touching the clamp, you should lower the probe to be same height level. Press “Continue” again.


It will ask what type of cutter you’re using on Condor Mini Plus screen, today we are taking 2.5mm as example, so select “2.5mm”, then press “Confirm”.




Step 2. Clamp Calibration

Press “Clamp Calibration”, select the clamp type you’re using: M1/M2. Today we are using an M1 clamp, so select M1.




  1. before using this function, please confirm that “Height Level Adjustment of Cutter” is completed.
  2. Put a Hon66 blank key in the middle position of the clamp, then tighten the clamp.


Press “Continue”, XC-Mini Plus starts calibrating…


Calibrate OK, press “Confirm” to return.




Step 3. Cutting Calibration

Return back to upper level, press “Cutting Calibration”.


  1. This function can cut a blank key, mainly for calibration.
  2. Before accessing this function, please confirm that the “Height Level Adjustment of Cutter” is completed.
  3. Install and fasten clamp M1.
  4. Clamp a blank key Hon66 on the Clamp M1, then line the key up with the first location jaw, and fasten.


Press “Continue”, Xhorse condor starts cutting…






You are now set to use the Condor XC-Mini Plus key cutting machine.

Commentaires (0) :: Poster un Commentaire! :: Lien Permanent

A Propos

Xhorse VVDI2, VVDI MB, VVDI-Prog, VVDI BMW, outil clé VVDI, Condor Mini, support technique DOLPHIN XP005.


Voir mon profil
Email Moi
Mon Blog RSS


Page 1 sur 4
Précédent | Suivant